Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: RF receiverDescription: nRF905 Sub-1GHz ISM The Nordic Semiconductor nRF9E5 RF transceiver SoC is designed for operation in the 433 MHz/868 MHz and 915 MHz ISM (Industrial, Scientific, and Medical) frequency bands. It also supports ShockBurst with serial SPI interface ™ Hardware protocol, and very suitable for applications that require large-scale operations. This nRF9E5 device includes an 8051 core microcontroller and is packaged in a compact QFN32 package. NRF905 Sub-1GHz ISM band transceiver RF frequency range: 433, 868, and 915MHz ISM band channel spacing: 100kHz (433MHz band), 200kHz (868/915MHz band) RF power output: up to+10dBm Receiver sensitivity: -100dBm, used for 0.1% BER modulation: GFSK, with Manchester encoding OTA data transmission rate: 50kbps ShockBurst ™ Function: Automatic processing of packet headers and CRC Support for Listen Before Send (LBT) Suitable for Frequency Hopping (FHSS) 4MHz 8051 core MCU, with 4KB RAM program memory, 256B data RAM, and 512B boot loader program ROM boot loader program loads 4-channel 10 bit ADC @ 80ksps from external EEPROM on SPI bus Up to 12 GPIO serial input/output ports: SPI, UART Real time clock provides multiple low-power modes under programming control Power supply:+1.9V to+3.6V DC Operating temperature range: -40 to+85 ° C Applications: wireless data communication, alarm and security systems, home automation, remote control, monitoring, automotive, telemetry, keyless entry, toys, Internet of Things (IoT) Local Communication # # # Single chip components, Nordic Semiconductor7797 -
![]()
Category: RF receiverDescription: IC RF TxRx Only Bluetooth Bluetooth v4.0 2.4GHz 32-VFQFN Exposed Pad3027 -
![]()
Category: RF receiverDescription: NRF24L01+ 2.4GHz ISM Nordic * * * Semiconductor * * nRF24L01+* * is a single-chip 2.4GHz transceiver used for ISM (Industrial, Scientific, and Medical) radio frequency band operation. Enhanced ShockBurst Embedded baseband protocol engine ™) Based on packet communication, it supports manual and advanced autonomous protocol operations. RF frequency range: 2.400 to 2.4835GHz ISM band, with 126 channels RF power output: up to 0dBm Receiver sensitivity: -94dBm @ 250kbps Modulation: GFSK Maximum OTA data transmission rate: 2Mbps Enhanced ShockBurst ™ The hardware link layer supports dynamic payload length of 1 to 32 bytes, packet assembly/disassembly, address and CRC calculation, automatic ACK and retransmission, and 6 x data pipeline MultiCeiver ™， Used for 1:6 star network host communication: serial SPI up to 10Mbps, Tx and Rx are 32 byte FIFO power supply:+1.9 to+3.6V DC applications: wireless PC peripherals, sports watches and sensors, RF remote control, used for consumer electronics, home and business automation, active RFID, asset tracking systems, ultra-low power sensor networks, used for Internet of Things (IoT) # # # single-chip components, Nordic Semiconductor1763 -
![]()
Category: RF receiverDescription: RF transceiver, 2.4GHz to 2.483GHz, GFSK, 2Mbps, 4dBm output, -85dBm input, 1.8V to 3.6V, QFN-487550 -
![]()
Category: RF receiverDescription: 射频收发器, 2.4GHz至2.525GHz, GFSK, 2Mbps, 0dBm输出, -82dBm输入, 1.9V至3.6V, QFN-202285 -
![]()
Category: RF receiverDescription: BLE/2.4GHz SoC 256KB/32KB DC-DC QFN 6 x 6 48Pin 13 Reel Rev 39255 -
![]()
Category: RF receiverDescription: Bluetooth IC RF TXRX+MCU ISM>; 1GHZ55581+$70.771010+$67.6940100+$67.1401250+$66.7094500+$66.03241000+$65.72472500+$65.29395000+$64.9247
